Product characteristics
      Sheet metal shell, strong anti-interference,The displacement of 450ML/ day is 10 times the dehumidification effect of traditional heaters, so that your cabinet bid farewell to humidity。
       The traditional ordinary heating dehumidifier causes cable aging because the heater temperature is too high, which seriously affects the product life, and the new intelligent dehumidifier canfineTo solve this problem, cables and other components are not affected by high temperatures, greatly improving service life and saving maintenance costs。

Product introduction

      BH-CS810 intelligent dehumidification device adopts semiconductor refrigeration dehumidification method， The humid air in the closed space is actively sucked into the dehumidification duct under the action of the fan， The water vapor in the air is condensed into water after passing through the semiconductor refrigeration mechanism， Then the cabinet is discharged through the aqueduct， Can achieve a good dehumidification effect。 By reducing the water content in the air, the relative humidity and absolute humidity are reduced at the same time, almost no increase in temperature, no negative impact caused by temperature difference, fundamentally eliminate or reduce the occurrence of accidents, and will not accelerate the aging of the components and cabinet due to high temperature。 The intelligent dehumidification device changes the passive method of preventing condensation to actively guide condensation, effectively preventing the aging of equipment in the cabinet, the reduction of insulation strength, the breakdown of secondary terminals, the material mildew and the corrosion of steel structural parts and other safety hazards, and ensuring the safe operation of the power grid。

Technical index

2.1 Input specifications: One temperature and humidity input module
2.2 Measuring range: Temperature: 0℃ ~ 100℃;Humidity: 0%RH to 99%RH
2.3 Basic Errors
      温度：±0.5℃(10℃～50℃)，±1℃(0℃～100℃)　
      Humidity: ±3%RH(10%RH ~ 90%RH), ±5%RH(0%RH ~ 99%RH)
2.4 Resolution: temperature 0.1℃，湿度0.1%RH
2.5 Control Mode: bit control
2.6 Output specifications: 250VAC/3A or 30VDC/3A
2.7 Power supply: 220VAC,50/60Hz, power consumption < 80VA。
2.8 Working environment: Temperature 0 ~ 50℃, humidity ≤ 85%RH non-corrosive occasions。
2.9 Dehumidification: Measured when the temperature is less than 35 degrees and the humidity is greater than 80%RH。
                   70W 500ML/ day, 60W 450ML/ day
                   45W 350ML/ day, 30W 220ML/ day